20kw 25kw 30kw on Grid Wind Turbine Controller and Three Phases Inverter

• Customization: Available
• Output Power: >1000W
• Communication: RS485/WiFi/GPRS/LAN
• Nature of Source Flow: Active Inverter
• Phase: Three
• Certification: CE, ISO9001
• Type: DC/AC Inverters
• Power Source: Wind Power
• Circuit Topologies: Full-Bridge Type
• Nature of Wave String: Sine Wave Inverter
• After-sales Service: Provide
• Warranty: 2 Years
• Brand: Deming
• Transport Package: Wooden Case
• Specification: 690*275*770mm
• Trademark: Deming
• Origin: China Jinan
• HS Code: 8504403090
• Production Capacity: 50000/Year

Product Description

Product Description

The On grid wind turbine system is composed of wind turbine, on grid controller, on grid inverter, metering device, and power distribution system. Wind energy is converted into AC electrical energy by the wind turbine, and then converted into DC electrical energy by the on grid controller, and then DC electrical energy is converted into AC electrical energy of the same frequency and phase as the grid by the on grid inverter, and part of the power is supplied to the local load. Surplus power is fed into the grid.

On grid wind turbine inverter performance characteristics

 (1)The main circuit uses the DSP chip produced by the American TI company, German Infineon IGBT module, drive protection is the Japanese Mitsubishi movement, and the on grid output part use isolation transformer, which is safe and reliable; 

(2) Using SPWM pulse width modulation technology, pure sine wave output, automatic synchronous tracking with the grid, power factor close to 1, low current harmonic content, no pollution to the grid, no impact;

(3) Wind turbine input maximum power tracking technology (MPPT)

(4) The power curve of the wind turbine can be set, the default is 20 points, and the internal expansion is 50

(5) 7-inch color touch screen display, system operation data and fault information at a glance, and convenient parameter setting;

(6) On grid inverter current closed-loop control, controllable and adjustable;

(7) The input DC voltage range is wide, adapt to the needs of different occasions;

(8) Frequency disturbance detection technology to realize anti-island control;

(9) The comprehensive power protection scheme and perfect self-detection and protection functions will stop the on grid inverter when a system failure occurs.

(10) Circuit structure is compact, the maximum efficiency≥98%

(11) Support RS485, WiFi, GPRS, Ethernet and other communication methods. You can monitor the working status of the on grid wind power generation system in real time through the PC or mobile phone, and you can also query the historical working status. The mobile terminal is compatible with Android and IOS. All data can be connected to the Internet of Things.

Detailed Photos

 

 

Product Parameters

  20KW on grid wind turbine controller and on gridwind  generator inverter parameters 
  

On grid wind turbine controller		WGMC10K380		WGMC20K380	WGMC30K380
Wind turbine input
Power		10KW		20KW	30KW
Max. Control power		20KW		40KW	60KW
Rated voltage of wind turbine (AC)		380V/400V		380V/400V	380V/400V
Input voltage range		AC 0-600V		AC 0-600V	AC 0-600V
		DC 0-900V		DC 0-900V	DC 0-900V
Braking voltage (DC)		550V±1%		550V±1%	550V±1%
Braking current (DC)		30A		60A	90A
Braking time min		10-20 min
Manual control		Manual brake
Automatic control function		Dump load control, * yaw, * pitch, * mechanical brake, * hydraulic brake, * electromagnetic brake
* PV. Input
Rated power (increased)		5KWp		5KWp	5KWp
Working voltage (DC)		550V / 660V		550V / 660V	550V / 660V
DC output parameters
Output voltage range (DC)		0-550V		0-550V	0-550V
Constant voltage (DC)		520V±1%		520V±1%	520V±1%
On grid wind turbine inverter		DMWG10KTL		DMWG20KTL	DMWG30KTL
Rated output power (AC)		10KW		20KW	30KW
Max. Output power (AC)		11KW		22KW	33KW
Input voltage rang (DC)		0-800V		0-800V	0-800V
MPPT Voltage range (DC)(DC)		150V-700V		150V-700V	150V-700V
Max. Input current (DC)		22.4A		44.9A	67.3A
Rated current		20.4A		40.8A	61.2A
THD Current harmonic		<3%(at rated power)
Power factor		0.8leading-1-0.8lagging, adjustable
Max. efficiency		98%
Allowable grid voltage range (AC)		220V/380V/440V/480V (Three-phase)±20%
Allowable grid frequency range		50Hz/60Hz±10%
Automatic operation conditions		DC input and power grid meet the requirements, and the inverter operates automatically
Restart time after power failure		5min (adjustable)
General parameters
Function	Rectification, DC output, output voltage control, output current control, Dump load control, control parameter setting, wind turbine curve setting
Automatic protection	Control part: Over voltage protection, over current protection, reverse connection protection, lightning arrester Inverter part: Polarity reverse connection protection, short circuit protection, island effect protection, LVRT, overheat protection, overload protection, ground fault protection, etc
Display	Touch screen, LCD
Monitoring content	Fan voltage, current, power, solar panel voltage, current, power, DC output voltage, current, power, inverter output power, * cumulative power generation, * power generation at any time, * rotational speed, * wind speed
Protection level	IP20(Indoor)IP65 (Outdoors)
Telematics	RS485/USB/GPRS/WIFI/Ethernet (optional)
Environment	Operating amb. Temp. & Hum -30-60°C,<90% no condensation
Noise (1m)	<40dB
Refrigeration mode	Forced air cooling
Size / weight
Controller size / weight		400*230*550mm   23kg	500*230*620mm    35kg		500*230*620mm    38kg
Dump load size / weight		690*450*530mm   36kg	980*880*540mm    70kg		980*880*540mm    70kg
Inverter size / weight		690*275*770mm   42kg	690*275*770mm    58kg		690*275*770mm    65kg

30KW on grid wind turbine controller and on gridwind  generator inverter parameters 
  

On grid wind turbine controller		WGMC10K380		WGMC20K380	WGMC30K380
Wind turbine input
Power		10KW		20KW	30KW
Max. Control power		20KW		40KW	60KW
Rated voltage of wind turbine (AC)		380V/400V		380V/400V	380V/400V
Input voltage range		AC 0-600V		AC 0-600V	AC 0-600V
		DC 0-900V		DC 0-900V	DC 0-900V
Braking voltage (DC)		550V±1%		550V±1%	550V±1%
Braking current (DC)		30A		60A	90A
Braking time min		10-20 min
Manual control		Manual brake
Automatic control function		Dump load control, * yaw, * pitch, * mechanical brake, * hydraulic brake, * electromagnetic brake
* PV. Input
Rated power (increased)		5KWp		5KWp	5KWp
Working voltage (DC)		550V / 660V		550V / 660V	550V / 660V
DC output parameters
Output voltage range (DC)		0-550V		0-550V	0-550V
Constant voltage (DC)		520V±1%		520V±1%	520V±1%
On grid wind turbine inverter		DMWG10KTL		DMWG20KTL	DMWG30KTL
Rated output power (AC)		10KW		20KW	30KW
Max. Output power (AC)		11KW		22KW	33KW
Input voltage rang (DC)		0-800V		0-800V	0-800V
MPPT Voltage range (DC)(DC)		150V-700V		150V-700V	150V-700V
Max. Input current (DC)		22.4A		44.9A	67.3A
Rated current		20.4A		40.8A	61.2A
THD Current harmonic		<3%(at rated power)
Power factor		0.8leading-1-0.8lagging, adjustable
Max. efficiency		98%
Allowable grid voltage range (AC)		220V/380V/440V/480V (Three-phase)±20%
Allowable grid frequency range		50Hz/60Hz±10%
Automatic operation conditions		DC input and power grid meet the requirements, and the inverter operates automatically
Restart time after power failure		5min (adjustable)
General parameters
Function	Rectification, DC output, output voltage control, output current control, Dump load control, control parameter setting, wind turbine curve setting
Automatic protection	Control part: Over voltage protection, over current protection, reverse connection protection, lightning arrester Inverter part: Polarity reverse connection protection, short circuit protection, island effect protection, LVRT, overheat protection, overload protection, ground fault protection, etc
Display	Touch screen, LCD
Monitoring content	Fan voltage, current, power, solar panel voltage, current, power, DC output voltage, current, power, inverter output power, * cumulative power generation, * power generation at any time, * rotational speed, * wind speed
Protection level	IP20(Indoor)IP65 (Outdoors)
Telematics	RS485/USB/GPRS/WIFI/Ethernet (optional)
Environment	Operating amb. Temp. & Hum -30-60°C,<90% no condensation
Noise (1m)	<40dB
Refrigeration mode	Forced air cooling
Size / weight
Controller size / weight		400*230*550mm   23kg	500*230*620mm    35kg		500*230*620mm    38kg
Dump load size / weight		690*450*530mm   36kg	980*880*540mm    70kg		980*880*540mm    70kg
Inverter size / weight		690*275*770mm   42kg	690*275*770mm    58kg		690*275*770mm    65kg

*Above parameter only for reference. Could be custom made to user specifications.

pameter only for reference. Could be custom 

 

Case

Company Profile

 

 FAQ
Q1: Are you a trading company or manufacturer?
We are a factory.

Q2: How long is your lead time?
It depends on the solution you require but generally 30 days. For more specific information, please don't hesitate to ask us

Q3. How to ensure product quality? 
Our production strictly follows the ISO9001 quality control system. We give the green (pass) sign only when we finish several quality inspections and high-temperature high-pressure tests

Q4.How about your payment and shipment?
Payment: We accept T/T, LC, Western Union, Alipay, etc. terms of payment.

Q5. Do you provide a warranty for the goods? And what are the terms of the warranty?
Yes, we provide 24 months warranty for all the goods. Please, contact us for information regarding warranty, technical support, and any other questions