| After-sales Service: | Yes |
|---|---|
| Warranty: | Yes |
| Type: | on Grid |
| Wind Turbine Rated Power: | 2kw |
| Wind Turbine Max. Power: | 4kw |
| Solar Panel Power: | 1.5kw/1500W |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier
The On grid wind turbine system is composed of wind turbine, on grid controller, on grid inverter, metering device, and power distribution system. Wind energy is converted into AC electrical energy by the wind turbine, and then converted into DC electrical energy by the on grid controller, and then DC electrical energy is converted into AC electrical energy of the same frequency and phase as the grid by the on grid inverter, and part of the power is supplied to the local load. Surplus power is fed into the grid.
Wind Turbine
1. High standard ,quality components for use in harsh and extreme environments for wind turbines .
2. Low wind speed model,has electric brake ,overcharging protection,stable output voltage comes with charge controller .
3. High efficiency and low mechanical resistance energy loss.
4. Excellent heat dissipation due to the aluminium alloy outer frame and special internal structure .
5. High strength from the fully heat treatment aluminium,anti-corrosion and weatherproof
6. Generator is designed using special material and treated to resist corrosion and oxidation.
7. Designed for reliable and long operational lifetime under long-term full output .
8. Designed for 20-years operation life .
9. Patent protected design.
Product Details:
1. Imported NSK Bearing
The generator adopts NSK bearing, which can withstand up to 7000rpm, ensuring the normal operation of the generator for a lifetime.
2. Pure Copper Enameled Wire
With insulating paint as insulating coating, the copper wire used for winding the electromagnetic coil is resistant to high temperature to ensure the power generation of the windings.
3.NdFeB Magnet
Generator magnetic steel model: N35SH, resistance to 150°C lifetime demagnetization, known as the king of magnetism.
4. Pure Copper Electric Slip Ring
Slip-ring copper content of more than 85%, basically no wear, fan life operation, no maintenance.
5. Convenient Flange Design
Use humanized flange design, easy to maintain and install.
|
Model |
DM3.2-2.0KW |
|
Rated speed(r/min) |
350r/min |
|
Rated power(KW) |
2KW |
|
Rated voltage(DC/V) |
48,96, 110 VDC |
|
Rated current(A) |
83,42,21,17 A |
|
Start-up wind speed(m/s) |
2m/s |
|
Rated wind speed(m/s) |
9m/s |
|
Safe wind speed(m/s) |
40m/s |
|
No of blades |
3 pieces |
|
Material of blades |
reinforced fire glass steel |
|
Generator |
3 phases PM generator |
|
Braking system |
Electromagnetic braking control |
|
Wind turbine weight(kg) |
68kg |
|
Packing weight(kg) |
85kg |
|
Tower height(customized) |
pull rod and independent rod |
| Type | FKJ-GT 2KW |
| Wind turbine rated power | 2KW |
| Wind turbine Max. power | 4KW |
| Wind turbine rated voltage | AC220V |
| Function | Rectifier,control, DC output |
| Automatic protection function | Over voltage protection, network electric cut off protection, regulated supply output, arrester |
| Manual function | Manual brake, reset, emergency switch |
| Display mode | LCD |
| Display content | Wind turbine voltage, current, power; Solar voltage, current, power; DC output voltage, DC output current, DC output power, total power. |
| PWM constant voltage | ≥320dc |
| wind turbine 3-phase dump load voltage | 350±5Vdc |
| Time-lapse of the wind turbine 3-phase dump load | 12-20 min |
| PWM dump load fuse | 10A |
| Fuse of DC output | 16A |
| Work environment temperature | -30-60°C |
| Relative humidity | <90% No condensation |
| Noise (1m) | <40dB |
| Degree of protection | IP20(Indoor) |
| Cooling method | Forced air cooling |
| *Communication interface (optional) | RS485/USB/GPRS/WIFI/Ethernet |
| Size of the controller (mm) | 560*430*320 |
| Weight of the controller | 18Kg |
| Size of the dump load (mm) | 500*460*330 |
| Weight of the dump load | 10Kg |
| Type | DMWG-2KDTL |
| Nominal capacity | 2KW |
| Rated AC output power | 2KW |
| Max. AC output power | 2.2KW |
| Wind Turbine Voltage | AC220V |
| Input voltage range | 0-450Vdc |
| MPPT range | 150~400Vdc |
| MPPT power curve | Can be set |
| Display | Touch screen |
| Rated DC Input Current | 6.45A |
| Max. DC Input current | 7.1A |
| THD of AC current | <3% (nominal power) |
| Power factor | >0.99 |
| Max. Efficiency | 98% |
| Allow the grid voltage range | AC220V (Single-phase)±20% |
| Nominal AC frequency | 50Hz±10% |
| Automatically put into operation | When the DC input and power grids meet to the requirements, the inverters automated operation |
| Auto restart time after cut off | 30S |
| Protection | Input short voltage, over voltage, connecting contrary, output over current, short circuit, over heat etc. |
| Communication interface | RS485/RS232/GPRS/WIFI/Ethernet (optional) |
| Work environment temperature | -10ºC~+55ºC |
| Relative humidity | 0~95% no condensing |
| Applicable altitude | ≤2000 m Higher than 2000m rated power should be reduced |
| Cooling method | Controlled forced-air cool |
| Noise (1m) | ≤60dB |
| Degree of protection | IP20 |
| Size(W*L*H) mm | 450*275*770 |
| Weight(kg) | 48 |
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}