| Customization: | Available |
|---|---|
| Conditions of Use: |
Land Use |
| Usage: | Emergency Crew, Standby Unit, Common Units |
|
Still deciding? Get samples of US$ 5500/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
55KW 500RPM PMG Hydraulic permanent magnet generator Characteristics
1. Optimum aerodynamic shape design: high efficiency, low noise.
2. Centrifugal pitch controlled mechanism: 3m/s low wind speed startup; 3-12m/s wind speed, following wind rotor rotate speed to adjust blade angle at optimum TSR, run in high efficiency; over rated wind speed, wind rotor never goes to over speed and has stable control; 3-35m/s wind speed, wind turbine can run smoothly.
3. Direct drive permanent magnet generator, low startup resistance moment, constant running ability of over loading 1.5 times, maintenance free for more than 30000 hour.
4. Safety control: has aerodynamic brake, electric magnet brake, mechanical brake and manual stop mechanism.
5. Sealed slip ring, no cable twist;
6. Streamline design.
7. Long acting anticorrosive treats, no corrosion in 15years.
production features
1.The generator has many poles, which improve the frequency and efficiency, saving the cost of rectifiers and inverters.
2.Finite Element Analysis is used when designing the generator.compact structure. Low startup torque, solves the problem of small wind startup, improving the wind energy utilization.
3.Leave out the gear increaser, improve the reliability and efficiency of the generator, lower the amount of maintenance.
4.H class insulation, vacuum pressure impregnation.
5.Have many stucures such as vertical axis. horizonal axis, ineal rotor external rotor plate type.
6.Strong rotors, the generator could achieve high speed.
7.Small size, light weight, high energy density, suitable for special situations.
8.Run efficiently throughout the whole speed range, high efficient.
9.Use imported high- speed oil-contained bearings, maintenance free, high reliability, long service life
10.The parameters like voltage, speed, power can be customized. The shape can be changed. Spline shaft, biaxial extension, flange can be used.
| On grid wind turbine inverter | DMWG50K | DMWG100K | DMWG200K |
| Rated output power (AC) | 50KW | 100KW | 200KW |
| Max. Output power (AC) | 55KW | 110KW | 220KW |
| Input voltage rang (DC) | 0-800V | 0-800V | 0-800V |
| MPPT Voltage range (DC) | 150V-700V | 150V-700V | 150V-700V |
| Max. Input current (DC) | 114.6A | 229A | 458.3A |
| Rated current | 104A | 208A | 416.7A |
| THD Current harmonic | <3%(at rated power) | ||
| Power factor | 0.8leading-1-0.8lagging, adjustable | ||
| Max. efficiency | 96% | ||
| Allowable grid voltage range (AC) | 220V/380V/440V/480V (Three-phase)±20% | ||
| Allowable grid frequency range | 50Hz/60Hz±10% | ||
| Automatic operation conditions | DC input and power grid meet the requirements, and the inverter operates automatically | ||
| Restart time after power failure | 30s (adjustable) | ||
| General parameters | |||
| Function | Wind turbine curve setting | ||
| Automatic protection | Polarity reverse connection protection, short circuit protection, island effect protection, LVRT,overheat protection, overload protection, ground fault protection, etc | ||
| Display | Touch screen, LCD | ||
| Monitoring content | DC input voltage, current, power, inverter output power, * cumulative power generation, * power generation at any time, * rotational speed, * wind speed | ||
| Protection level | IP20(Indoor)IP65 (Outdoors) | ||
| Telematics | RS485/USB/GPRS/WIFI/Ethernet (optional) | ||
| Environment | Operating amb. Temp. & Hum -30-60°C,<90% no condensation | ||
| Noise (1m) | <40dB | ||
| Refrigeration mode | Forced air cooling | ||
| Size / weight | |||
| Inverter size / weight | 750*600*1320mm 340kg | 1460*860*1820mm 600kg | 1460*860*1820mm 900kg |
FAQ
){kind=link}