| Nature of Source Flow: | Passive inverter |
|---|---|
| Certification: | ISO9001, CE |
| Output Power: | 250kw |
| Grid Type: | off-Grid Inverter |
| Output Type: | Triple |
| Circuit Topologies: | Full-Bridge Type |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier 
Introducing our advanced energy solution:
Energy flows bi-directionally, allowing for efficient discharge from the battery side to the DC grid or charging from the DC grid side to the battery.
Enjoy peace of mind with our fully automatic protection functions, including overheating, overload, short circuit, and overcurrent protection.
Experience superior performance with our selection of original imported power devices.
Benefit from our fully digital circuit design, ensuring optimal efficiency and reliability.
Rest assured knowing that all our chips are industrial grade and can operate flawlessly in cold, high temperature, and humid environments.
Our main circuit features a DSP chip produced by TI of America, Infineon IGBT module, and Infineon movement for driving and protection, guaranteeing safety and reliability.
Enjoy seamless integration with the grid as our output is automatically synchronized, resulting in low current harmonic content and no pollution or impact on the grid.
Take control with our closed-loop control of grid-connected current, providing controllability and adjustability.
Adapt to different occasions with our wide input voltage range, ensuring suitability for various settings.
Experience comprehensive power protection with our all-round power protection scheme and perfect self-test and protection function. In case of system failure, the system will automatically stop working.
Our circuit structure is compact, maximizing efficiency with a rating of ≥ 96%.
Customize the protection level according to your needs.
Connect seamlessly with our Ethernet interface and utilize the standard Modbus TCP communication protocol.
|
Rated power |
250KW |
|
LV rated current |
358A MAX:716A |
|
LV voltage range |
600-700Vdc |
|
Ripples coefficient |
HV side < 1% F.S. LV side < 2% F.S. |
|
Control accuracy |
< 1%(Remote and local control, @ full load) |
|
Max. efficiency |
96% @ full load |
|
Switching frequency on IGBTs |
6kHz |
|
HV Voltage range |
900-1314Vdc |
|
Dynamic response time |
<2ms |
|
Protection function |
Reverse polarity, overheating, overload, overvoltage, overcurrent, undervoltage, etc |
|
Display |
Touch screen |
|
Time propagation |
200ms |
|
Communication interface and protocol |
Modbus_ TCP, RJ45 Modbus_ RTU, RS485 |
|
RS485 interface number |
one |
|
Working temperature |
-10ºC to +50ºC |
|
Relative humidity |
0~95%,No condensation |
|
Altitude |
≤2000m(More than 2000 meters need to be reduced) |
|
Cooling mode |
Air cooling |
|
Noise |
≤65dB |
|
Emergency stop switch |
yes |
|
Level of protection |
IP55 |
|
System electrical input |
AC230V 50/60Hz 1000W |
| Rated power | 500KW |
| LV rated current | 667A MAX:734A |
| LV voltage range | 680-790Vdc |
| Ripples coefficient | HV side < 1% F.S. |
| LV side < 2% F.S. | |
| Control accuracy | < 1%(Remote and local control, @ full load) |
| Max. efficiency | 98% @ full load |
| Switching frequency on IGBTs | 6kHz |
| HV Voltage range | 900-1314Vdc |
| Dynamic response time | <2ms |
| Protection function | Reverse polarity, overheating, overload, overvoltage, overcurrent, undervoltage, etc |
| Display | Touch screen |
| Time propagation | 200ms |
| Communication interface and protocol | Modbus_ TCP, RJ45 Modbus_ RTU, RS485 |
| RS485 interface number | one |
| Working temperature | -10ºC to +50ºC |
| Relative humidity | 0~95%,No condensation |
| Altitude | ≤2000m(More than 2000 meters need to be reduced) |
| Cooling mode | Air cooling |
| Noise | ≤65dB |
| Emergency stop switch | yes |
| Level of protection | IP55 |
| System electrical input | AC220V 1000W |
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}