| Customization: | Available |
|---|---|
| Nature of Source Flow: | Active Inverter |
| Certification: | ISO9001, CE |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Model | DMWG-30KS |
| Isolation | Frequency transformer isolation |
| Maximum DC input power | 33KWp |
| Maximum input voltage allows the fan | 800Vdc |
| Maximum Power Point Tracking (MPPT) range | 200Vdc-780Vdc |
| Nominal AC output power | 30KW |
| Max. AC output power | 33KW |
| THD of AC current | <3%(Rated power) |
| Power factor | >0.99 |
| Max. efficiency | 94% |
| Euro efficiency | 92% |
| Output rating voltage | 380Vac 50HZ |
| Allowed Grid Voltage Range | 310~450Vac |
| Allowed Grid Frequency Range | 47.5~51.5Hz |
| Internal power consumption an night | <10W |
| Automatically put into operation conditions | DC input and power to meet the requirements, the inverter automatically run |
| Automatic restart after power failure time | 2min |
| Protection | Reverse polarity, short circuit, island, overheating and overload etc |
| Comm. interfaces | RS485(Modbus Agreement) |
| Operating Temp. | -25ºC~+60ºC |
| Relative humidity | 0~90%,Non-condensing |
| Altitude(m) | 6000 meters (over 2000 m with derating required) |
| Cooling method | Forced air cooling |
| Noise | ≤60dB |
| Protection degree | IP20(indoor) |
| Communications monitoring | Inverter via RS485 communication for start-stop control and routine data monitoring |
| Type | FKJ-GT-30KW |
| Wind turbine rated power | 30KW |
| Wind turbine Max. power | 60KW |
| Solar panel power | 10KW |
| Function | Rectifier,charge, control |
| Display mode | LED |
| Display content | DC output voltage |
| PWM constant voltage | ≥600dc |
| wind turbine 3-phase dump load voltage1 | 640±5Vdc |
| wind turbine 3-phase dump load voltage2 | 650±5Vdc |
| Time-lapse of the wind turbine 3-phase dump load2 | 3 min |
| wind turbine 3-phase dump load voltage3 | 630±5Vdc |
| Time-lapse of the wind turbine 3-phase dump load3 | 12-20 min |
| Low-voltage | ≤200Vdc |
| Solar panel fuse | 25A |
| PWM dump load fuse | 63A |
| Fuse of DC output | 80A |
| Work environment temperature | -30-60°C |
| Relative humidity | <90%No condensation |
| Noise (1m) | <40dB |
| Degree of protection | IP20(Indoor) |
| Cooling method | Forced air cooling |
| *Communication interface (optional) | RS485/USB/GPRS/Ethernet |
| *Temperature compensation (optional) | -4mv/°C/2V,-35°C~+80°C, Accuracy:±1°C |
| Size of the controller (mm) | 760*600*335 |
| Weight of the controller | 42Kg |
| Size of the dump load (mm) | 760*520*1200 |
| Weight of the dump load | 90Kg |
){kind=link}