Deming Grid Tie Inverter for Efficient Wind Energy Conversion

• Nature of Source Flow: Active Inverter
• Certification: ISO9001, RoHS, CE
• Output Power: >1000W
• Grid Type: Grid Inverter
• Output Type: Triple
• Circuit Topologies: Full-Bridge Type
• Model NO.: DMWG-20KSTL
• Nature of Wave String: Sine Wave Inverter
• Type: DC/AC Inverters
• Communication: RS485/WiFi/GPRS/LAN
• Transport Package: Wooden Case
• Specification: 450*275*770mm 60kg
• Trademark: Deming
• Origin: China Jinan
• HS Code: 8504403090
• Production Capacity: 50000/Year

Product Description

Product Description

On Grid Wind Turbine System - Product Description

On Grid Wind Turbine System

The On Grid Wind Turbine System, developed by Jinan Deming Power Equipment Co., Ltd, is an efficient and reliable solution for harnessing wind energy and converting it into usable electrical power.

Components

• Wind Turbine


• On Grid Controller


• On Grid Inverter


• Metering Device


• Power Distribution System

Functionality

The wind turbine captures the kinetic energy of the wind and converts it into AC electrical energy. This energy is then processed by the on grid controller, which converts it into DC electrical energy. The on grid inverter further converts the DC electrical energy into AC electrical energy that matches the frequency and phase of the grid. A portion of this power is supplied to the local load, while any surplus power is fed back into the grid.

Performance Characteristics

The On Grid Wind Turbine Inverter is designed to deliver exceptional performance. It ensures efficient conversion of wind energy into electrical energy, allowing for maximum utilization of available resources. With its advanced technology and reliable components, this system guarantees a stable and consistent power supply.

Product Description

On Grid Wind Power Generation System

Jinan Deming Power Equipment Co., Ltd is proud to present its advanced On Grid Wind Power Generation System. With cutting-edge technology and superior components, this system offers unmatched performance and reliability.

Features:

• The main circuit utilizes the DSP chip produced by the renowned American TI company, ensuring top-notch quality.


• German Infineon IGBT module and Japanese Mitsubishi movement provide reliable drive protection.


• On grid output part utilizes an isolation transformer for enhanced safety.


• SPWM pulse width modulation technology enables pure sine wave output, ensuring no pollution or impact on the grid.


• Automatic synchronous tracking with the grid ensures a power factor close to 1 and low current harmonic content.


• Wind turbine input maximum power tracking technology (MPPT) optimizes energy capture.


• Power curve of the wind turbine can be easily set, with a default of 20 points and an internal expansion of 50.


• 7-inch color touch screen display provides a convenient and intuitive interface for system operation data, fault information, and parameter settings.


• On grid inverter current closed-loop control allows for precise and adjustable control.


• Wide input DC voltage range to adapt to various occasions and requirements.


• Frequency disturbance detection technology enables anti-island control.


• Comprehensive power protection scheme and self-detection and protection functions ensure system safety.


• Compact circuit structure with a maximum efficiency of ≥98%.


• Supports RS485, WiFi, GPRS, Ethernet, and other communication methods for real-time monitoring of the system's working status through PC or mobile devices.


• Compatible with Android and IOS mobile terminals, allowing historical working status queries and seamless integration with the Internet of Things.

Choose Jinan Deming Power Equipment Co., Ltd for an On Grid Wind Power Generation System that combines cutting-edge technology, reliability, and convenience. Experience the future of clean and efficient energy generation today!

For more information, please contact Jinan Deming Power Equipment Co., Ltd.

Detailed Photos

 

Product Parameters

Deming Grid Tie Inverter for Efficient Wind Energy Conversion

Experience efficient wind energy conversion with our 20KW on-grid wind turbine controller and generator inverter. Our reliable and powerful inverter is designed for on-grid wind turbines, providing efficient and seamless integration with the grid. Perfect for wind energy conversion projects.

 

On grid wind turbine controller			WGMC10K380	WGMC20K380		WGMC30K380
Wind turbine input
Power			10KW	20KW		30KW
Max. Control power / current			20KW/40A	40KW/80A		60KW/120A
Rated voltage of wind turbine (AC)			380V/400V	380V/400V		380V/400V
Input voltage range		AC	0-600V	0-600V		0-600V
		DC	0-900V	0-900V		0-900V
Braking voltage (DC)		Default	550V±1%	550V±1%		550V±1%
		Set range	530-560V	530-560V		530-560V
Braking current (DC)		Default	30A	60A		90A
		Set range	0-30A	0-60A		0-90A
Braking time		Default	10-20 min
		Set range	0-5000 min
* Generator overspeed control		Default	>300 rpm/min
		Set range	0-1000 rpm/min
* Over wind speed control		Default	14 m/s
		Set range	0-45 m/s
Manual control		Manual brake, *remote control brake (with communication function)
Automatic control function		Dump load control, * yaw, * pitch, * mechanical brake, * hydraulic brake, * electromagnetic brake
* PV. Input
Rated power (increased)			5KWp	5KWp		5KWp
Working voltage (DC)			550V / 660V	550V / 660V		550V / 660V
DC output parameters
Output voltage range (DC)			0-550V	0-550V		0-550V
Constant voltage (DC)		Default	520V±1%	520V±1%		520V±1%
		Set range	510-540V	510-540V		510-540V
Constant current (DC)		Default	24A	48A		72A
		Set range	0-24A	0-48A		0-72A
On grid wind turbine inverter			DMWG10KTL	DMWG20KTL		DMWG30KTL
Rated output power (AC)			10KW	20KW		30KW
Max. Output power (AC)			11KW	22KW		33KW
Input voltage rang (DC)			0-800V	0-800V		0-800V
MPPT Voltage range (DC)(DC)			150V-700V	150V-700V		150V-700V
Max. Input current (DC)			2.4A	44.9A		67.3A
Rated current			20.4A	40.8A		61.2A
THD Current harmonic			<3%(at rated power)
Power factor			>0.99
Max. efficiency			98%
Allowable grid voltage range (AC)			220V/380V/440V/480V (Three-phase)±20%
Allowable grid frequency range			50Hz/60Hz±10%
Automatic operation conditions			DC input and power grid meet the requirements, and the inverter operates automatically
Restart time after power failure			2min(Adjustable)
General parameters
Function	Rectification, DC output, output voltage control, output current control, Dump load control, control parameter setting, wind turbine curve setting
Automatic protection	Control part: Over voltage protection, over current protection, reverse connection protection, lightning arrester Inverter part: Polarity reverse connection protection, short circuit protection, island effect protection, LVRT,overheat protection, overload protection, ground fault protection, etc
Display	Touch screen, LCD
Monitoring content	Wind turbine voltage, current, power, solar panel voltage, current, power, DC output voltage, current, power, inverter output power, * cumulative power generation, * power generation at any time, * rotational speed, * wind speed
Protection level	IP20(Indoor)IP65 (Outdoors)
Telematics	RS485/USB/GPRS/WIFI/Ethernet (optional)
Environment	Operating amb. Temp. & Hum  -30-60°C,<90% no condensation
Noise (1m)	<40dB
Refrigeration mode	Forced air cooling
Controller size / weight	400*230*550mm   23kg		500*230*620mm    35kg		500*230*620mm    38kg
Dump load size / weight	690*450*530mm   36kg		980*880*540mm    70kg		980*880*540mm    70kg
Inverter size / weight	690*275*770mm   42kg		690*275*770mm    58kg		690*275*770mm    65kg

Jinan Deming Power Equipment Co., Ltd presents the Deming Grid Tie Inverter for Efficient Wind Energy Conversion. This powerful 20kw inverter is designed for wind turbines, providing reliable and efficient grid tie conversion. It is a hybrid inverter that can be used for both on-grid and off-grid applications. With its pure sine wave output and energy storage capabilities, it is the perfect solution for wind energy conversion.

 

On grid wind turbine controller			WGMC3K220		WGMC5K220
Wind turbine input
Power			3KW		5KW
Max. Control power / current			6KW/20A		10KW/34A
Rated voltage of wind turbine (AC)			220V		220V
Input voltage range		AC	0-330V		0-330V
		DC	0-450V		0-450V
Braking voltage (DC)		Default	350V±1%		350V±1%
		Set range	320-350V		320-350V
Braking current (DC)		Default	15A		25A
		Set range	0-15A		0-25A
Braking time		Default	10-20 min
		Set range	0-5000 min
* Generator overspeed control		Default	>300 rpm/min
		Set range	0-1000 rpm/min
* Over wind speed control		Default	14 m/s
		Set range	0-45 m/s
Manual control		Manual brake,*remote control brake (with communication function)
Automatic control function		Dump load control, * yaw, * pitch, * mechanical brake, * hydraulic brake,  * electromagnetic brake
* PV. Input
Rated power (increased)			3KWp		3KWp
Working voltage (DC)			320V / 400V		320V / 400V
DC output parameters
Output voltage range (DC)			0-350V		0-350V
Constant voltage (DC)		Default	310V±1%		310V±1%
		Set range	300-330V		300-330V
Constant current (DC)		Default	12A		20A
		Set range	0-12A		0-20A
On grid wind turbine inverter			DMWG3KTL		DMWG5KTL
Rated output power (AC)			3KW		5KW
Max. Output power (AC)			3.3KW		5.5KW
Input voltage rang (DC)			0-450V		0-450V
MPPT Voltage range (DC)			100V-400V		100V-400V
Max. Input current (DC)			11.2A		18.7A
Rated current			10.2A		17A
THD Current harmonic			<3%(at rated power)
Power factor			>0.99
Max. efficiency			98%
Allowable grid voltage range (AC)			110V/120V/220V (Single-phase)±20%
Allowable grid frequency range			50Hz/60Hz±10%
Automatic operation conditions			DC input and power grid meet the requirements, the inverter operates automatically
Restart time after power failure			2min(Adjustable)
General parameters
Function	Rectification, DC output, output voltage control, output current control, Dump load control, control parameter setting, wind turbine curve setting
Automatic protection	Control part: Over voltage protection, over current protection, reverse connection protection, lightning arrester Inverter part: Polarity reverse connection protection, short circuit protection, island effect protection,LVRT,overheat protection, overload protection, ground fault protection, etc
Display	Touch screen, LCD
Monitoring content	Wind turbine voltage , current, power, solar panel voltage, current, power, DC output voltage, current, power, inverter output power, * cumulative power generation, * power generation at any time, * rotational speed, * wind speed
Protection level	IP20(Indoor)IP65 (Outdoors)
Telematics	RS485/USB/GPRS/WIFI/Ethernet (optional)
Environment	Operating amb. Temp. & Hum  -30-60°C,<90% no condensation
Noise (1m)	<40dB
Refrigeration mode	Forced air cooling
Controller size / weight	360*230*480mm       17kg			360*230*480mm       18kg
Dump load size / weight	400*400*250mm       12kg			600*450*380mm       28kg
Inverter size / weight	450*275*770mm       39kg			450*275*770mm       44kg

Jinan Deming Power Equipment Co., Ltd presents the Deming Grid Tie Inverter for Efficient Wind Energy Conversion. This 20kw grid tie inverter is designed for wind turbines, offering reliable and powerful wind energy conversion. It is a hybrid inverter that can be used for both on-grid and off-grid applications. With its efficient wind energy inverter technology and energy storage capabilities, it is the perfect solution for wind energy conversion.

*Above parame
 

Product Name: Deming Grid Tie Inverter for Efficient Wind Energy Conversion

Company Name: Jinan Deming Power Equipment Co., Ltd

Description: The Deming Grid Tie Inverter is a powerful and reliable solution for efficiently converting wind energy. This 20kw inverter is designed for wind turbine power and offers both on-grid and off-grid capabilities. With its pure sine wave output and energy storage compatibility, it is an ideal choice for hybrid wind energy systems. Experience efficient wind energy conversion with this high-quality inverter from Jinan Deming Power Equipment Co., Ltd.

Certifications

Our Advantages

More products

 

Case

Company Profile