Grid Tie Wind Generator Inverter

• Nature of Source Flow: Active Inverter
• Certification: ISO9001, RoHS, CE
• Output Power: >1000W
• Grid Type: Grid Inverter
• Output Type: Triple
• Circuit Topologies: Full-Bridge Type
• Model NO.: DMWG-15KSTL
• Nature of Wave String: Sine Wave Inverter
• Type: DC/AC Inverters
• Communication: RS485/WiFi/GPRS/LAN
• Transport Package: Wooden Case
• Specification: 450*275*770mm 60kg
• Trademark: Deming
• Origin: China Jinan
• HS Code: 8504403090
• Production Capacity: 50000/Year

Product Description

Product Description

On Grid Wind Turbine System

The On Grid Wind Turbine System, developed by Jinan Deming Power Equipment Co., Ltd, is a comprehensive solution for harnessing wind energy and integrating it into the electrical grid. This system consists of a wind turbine, on grid controller, on grid inverter, metering device, and power distribution system.

With this system, wind energy is efficiently converted into AC electrical energy by the wind turbine. The on grid controller then converts this energy into DC electrical energy, which is further transformed into AC electrical energy of the same frequency and phase as the grid by the on grid inverter. A portion of this power is supplied to the local load, while any surplus power is seamlessly fed into the grid.

Key Features:

• Efficient conversion of wind energy into AC electrical energy


• Seamless integration with the electrical grid


• Reliable on grid controller for smooth energy conversion


• High-performance on grid inverter for optimal power output


• Metering device for accurate measurement of energy production


• Power distribution system for efficient power delivery

Benefits:

• Utilizes renewable wind energy to reduce reliance on traditional power sources


• Contributes to a greener and more sustainable energy future


• Generates clean electricity with minimal environmental impact


• Allows for the efficient utilization of surplus power by feeding it into the grid


• Enables cost savings by reducing energy bills through local power supply

Product Description

On Grid Wind Power Generation System

Jinan Deming Power Equipment Co., Ltd is proud to present its advanced On Grid Wind Power Generation System. Designed to meet the needs of English-speaking natives, this system incorporates cutting-edge technology and offers a range of features and benefits:

1. The main circuit utilizes the DSP chip produced by the American TI company, German Infineon IGBT module, and drive protection from the Japanese Mitsubishi movement. The on grid output part uses an isolation transformer, ensuring safety and reliability.


2. Utilizing SPWM pulse width modulation technology, our system provides pure sine wave output. It automatically synchronizes with the grid, resulting in a power factor close to 1 and low current harmonic content. This ensures no pollution or impact on the grid.


3. Our system incorporates Wind Turbine Input Maximum Power Tracking Technology (MPPT), optimizing power generation efficiency.


4. The power curve of the wind turbine can be set, with the default being 20 points. The internal expansion allows for up to 50 points.


5. Featuring a 7-inch color touch screen display, our system provides a clear overview of system operation data and fault information. It also allows for convenient parameter setting.


6. With on grid inverter current closed-loop control, our system offers controllable and adjustable performance.


7. The input DC voltage range is wide, making it adaptable to different occasions.


8. Our system incorporates frequency disturbance detection technology, enabling anti-island control.


9. With a comprehensive power protection scheme and perfect self-detection and protection functions, the on grid inverter will automatically stop in case of a system failure.


10. The circuit structure is compact, ensuring maximum efficiency of at least 98%.


11. Our system supports various communication methods, including RS485, WiFi, GPRS, and Ethernet. You can monitor the working status of the on grid wind power generation system in real time through your PC or mobile phone. The mobile terminal is compatible with Android and iOS, and all data can be connected to the Internet of Things.

Experience the future of wind power generation with Jinan Deming Power Equipment Co., Ltd's On Grid Wind Power Generation System. Harness the power of nature while enjoying reliable and efficient energy production.

Detailed Photos

 

Product Parameters

Product Name: Grid Tie Wind Generator Inverter

Company Name: Jinan Deming Power Equipment Co., Ltd

Keywords: Wind Generator Inverter, Grid Tie Inverter, Wind Turbine Inverter, Wind Solar Hybrid Inverter, Energy Storage Inverter, Power Inverter

Description: Explore our 10KW on-grid wind turbine controller and generator inverter. Perfect for grid tie systems, this inverter ensures efficient and reliable wind power generation. Experience the benefits of renewable energy with our advanced technology.

 

On grid wind turbine controller			WGMC10K380	WGMC20K380		WGMC30K380
Wind turbine input
Power			10KW	20KW		30KW
Max. Control power / current			20KW/40A	40KW/80A		60KW/120A
Rated voltage of wind turbine (AC)			380V/400V	380V/400V		380V/400V
Input voltage range		AC	0-600V	0-600V		0-600V
		DC	0-900V	0-900V		0-900V
Braking voltage (DC)		Default	550V±1%	550V±1%		550V±1%
		Set range	530-560V	530-560V		530-560V
Braking current (DC)		Default	30A	60A		90A
		Set range	0-30A	0-60A		0-90A
Braking time		Default	10-20 min
		Set range	0-5000 min
* Generator overspeed control		Default	>300 rpm/min
		Set range	0-1000 rpm/min
* Over wind speed control		Default	14 m/s
		Set range	0-45 m/s
Manual control		Manual brake, *remote control brake (with communication function)
Automatic control function		Dump load control, * yaw, * pitch, * mechanical brake, * hydraulic brake, * electromagnetic brake
* PV. Input
Rated power (increased)			5KWp	5KWp		5KWp
Working voltage (DC)			550V / 660V	550V / 660V		550V / 660V
DC output parameters
Output voltage range (DC)			0-550V	0-550V		0-550V
Constant voltage (DC)		Default	520V±1%	520V±1%		520V±1%
		Set range	510-540V	510-540V		510-540V
Constant current (DC)		Default	24A	48A		72A
		Set range	0-24A	0-48A		0-72A
On grid wind turbine inverter			DMWG10KTL	DMWG20KTL		DMWG30KTL
Rated output power (AC)			10KW	20KW		30KW
Max. Output power (AC)			11KW	22KW		33KW
Input voltage rang (DC)			0-800V	0-800V		0-800V
MPPT Voltage range (DC)(DC)			150V-700V	150V-700V		150V-700V
Max. Input current (DC)			2.4A	44.9A		67.3A
Rated current			20.4A	40.8A		61.2A
THD Current harmonic			<3%(at rated power)
Power factor			>0.99
Max. efficiency			98%
Allowable grid voltage range (AC)			220V/380V/440V/480V (Three-phase)±20%
Allowable grid frequency range			50Hz/60Hz±10%
Automatic operation conditions			DC input and power grid meet the requirements, and the inverter operates automatically
Restart time after power failure			2min(Adjustable)
General parameters
Function	Rectification, DC output, output voltage control, output current control, Dump load control, control parameter setting, wind turbine curve setting
Automatic protection	Control part: Over voltage protection, over current protection, reverse connection protection, lightning arrester Inverter part: Polarity reverse connection protection, short circuit protection, island effect protection, LVRT,overheat protection, overload protection, ground fault protection, etc
Display	Touch screen, LCD
Monitoring content	Wind turbine voltage, current, power, solar panel voltage, current, power, DC output voltage, current, power, inverter output power, * cumulative power generation, * power generation at any time, * rotational speed, * wind speed
Protection level	IP20(Indoor)IP65 (Outdoors)
Telematics	RS485/USB/GPRS/WIFI/Ethernet (optional)
Environment	Operating amb. Temp. & Hum  -30-60°C,<90% no condensation
Noise (1m)	<40dB
Refrigeration mode	Forced air cooling
Controller size / weight	400*230*550mm   23kg		500*230*620mm    35kg		500*230*620mm    38kg
Dump load size / weight	690*450*530mm   36kg		980*880*540mm    70kg		980*880*540mm    70kg
Inverter size / weight	690*275*770mm   42kg		690*275*770mm    58kg		690*275*770mm    65kg

Jinan Deming Power Equipment Co., Ltd offers a customizable Grid Tie Wind Generator Inverter. This inverter is designed to connect wind generators, hydroelectric generators, and ocean power generators to the grid. It is suitable for both on-grid and off-grid systems, and can be used for wind solar hybrid systems. With a power capacity of 5kw or 10kw, this inverter is a reliable solution for wind power generation.

 

On grid wind turbine controller			WGMC3K220		WGMC5K220
Wind turbine input
Power			3KW		5KW
Max. Control power / current			6KW/20A		10KW/34A
Rated voltage of wind turbine (AC)			220V		220V
Input voltage range		AC	0-330V		0-330V
		DC	0-450V		0-450V
Braking voltage (DC)		Default	350V±1%		350V±1%
		Set range	320-350V		320-350V
Braking current (DC)		Default	15A		25A
		Set range	0-15A		0-25A
Braking time		Default	10-20 min
		Set range	0-5000 min
* Generator overspeed control		Default	>300 rpm/min
		Set range	0-1000 rpm/min
* Over wind speed control		Default	14 m/s
		Set range	0-45 m/s
Manual control		Manual brake,*remote control brake (with communication function)
Automatic control function		Dump load control, * yaw, * pitch, * mechanical brake, * hydraulic brake,  * electromagnetic brake
* PV. Input
Rated power (increased)			3KWp		3KWp
Working voltage (DC)			320V / 400V		320V / 400V
DC output parameters
Output voltage range (DC)			0-350V		0-350V
Constant voltage (DC)		Default	310V±1%		310V±1%
		Set range	300-330V		300-330V
Constant current (DC)		Default	12A		20A
		Set range	0-12A		0-20A
On grid wind turbine inverter			DMWG3KTL		DMWG5KTL
Rated output power (AC)			3KW		5KW
Max. Output power (AC)			3.3KW		5.5KW
Input voltage rang (DC)			0-450V		0-450V
MPPT Voltage range (DC)			100V-400V		100V-400V
Max. Input current (DC)			11.2A		18.7A
Rated current			10.2A		17A
THD Current harmonic			<3%(at rated power)
Power factor			>0.99
Max. efficiency			98%
Allowable grid voltage range (AC)			110V/120V/220V (Single-phase)±20%
Allowable grid frequency range			50Hz/60Hz±10%
Automatic operation conditions			DC input and power grid meet the requirements, the inverter operates automatically
Restart time after power failure			2min(Adjustable)
General parameters
Function	Rectification, DC output, output voltage control, output current control, Dump load control, control parameter setting, wind turbine curve setting
Automatic protection	Control part: Over voltage protection, over current protection, reverse connection protection, lightning arrester Inverter part: Polarity reverse connection protection, short circuit protection, island effect protection,LVRT,overheat protection, overload protection, ground fault protection, etc
Display	Touch screen, LCD
Monitoring content	Wind turbine voltage , current, power, solar panel voltage, current, power, DC output voltage, current, power, inverter output power, * cumulative power generation, * power generation at any time, * rotational speed, * wind speed
Protection level	IP20(Indoor)IP65 (Outdoors)
Telematics	RS485/USB/GPRS/WIFI/Ethernet (optional)
Environment	Operating amb. Temp. & Hum  -30-60°C,<90% no condensation
Noise (1m)	<40dB
Refrigeration mode	Forced air cooling
Controller size / weight	360*230*480mm       17kg			360*230*480mm       18kg
Dump load size / weight	400*400*250mm       12kg			600*450*380mm       28kg
Inverter size / weight	450*275*770mm       39kg			450*275*770mm       44kg

Product Name: Grid Tie Wind Generator Inverter

Company Name: Jinan Deming Power Equipment Co., Ltd

Description: Customizable wind generator inverter for grid tie systems. Ideal for wind, hydroelectric, and ocean power generators. Efficiently converts DC power to AC for seamless integration with the grid. Suitable for wind solar hybrid systems. Energy storage capability available.

*Above parame
 

Product Description: The Grid Tie Wind Generator Inverter by Jinan Deming Power Equipment Co., Ltd is a reliable and efficient solution for connecting wind generators to the grid. This inverter is designed for both on-grid and off-grid systems, making it versatile and adaptable. With a power capacity of 5kw or 10kw, it is suitable for various wind power generation applications. Whether you have a wind-only system or a wind-solar hybrid system, this inverter is the perfect choice for seamless integration with the grid.

Certifications

Our Advantages

More products

 

Case

Company Profile