| Customization: | Available |
|---|---|
| Nature of Source Flow: | Passive inverter |
| Certification: | ISO9001, CE |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Our energy system offers bi-directional flow, allowing for both discharge from the battery side to the DC grid and charge from the DC grid side to the battery. With fully automatic protection functions for overheating, overload, short circuit, overcurrent, and more, you can trust in the safety and reliability of our product.
Our selection of original imported power devices, along with a fully digital circuit design, ensures optimal performance. All the chips used are industrial grade, capable of operating in cold, high temperature, and humid environments.
The main circuit incorporates a DSP chip produced by TI of America, Infineon IGBT module, and Infineon movement for driving and protection. This combination guarantees a synchronized output with the grid, low current harmonic content, and no pollution or impact on the grid.
Our system features closed loop control of grid connected current, providing controllable and adjustable output. The wide input voltage range makes it suitable for various occasions.
With a compact circuit structure and a maximum efficiency of ≥ 96%, our product offers reliable power protection and a perfect self-test and protection function. In the event of a system failure, it will automatically stop working.
Customizable protection levels cater to your specific needs, and the inclusion of an Ethernet interface and standard Modbus TCP communication protocol ensures seamless connectivity.
|
Rated power |
250KW |
|
LV rated current |
358A MAX:716A |
|
LV voltage range |
600-700Vdc |
|
Ripples coefficient |
HV side < 1% F.S. LV side < 2% F.S. |
|
Control accuracy |
< 1%(Remote and local control, @ full load) |
|
Max. efficiency |
96% @ full load |
|
Switching frequency on IGBTs |
6kHz |
|
HV Voltage range |
900-1314Vdc |
|
Dynamic response time |
<2ms |
|
Protection function |
Reverse polarity, overheating, overload, overvoltage, overcurrent, undervoltage, etc |
|
Display |
Touch screen |
|
Time propagation |
200ms |
|
Communication interface and protocol |
Modbus_ TCP, RJ45 Modbus_ RTU, RS485 |
|
RS485 interface number |
one |
|
Working temperature |
-10ºC to +50ºC |
|
Relative humidity |
0~95%,No condensation |
|
Altitude |
≤2000m(More than 2000 meters need to be reduced) |
|
Cooling mode |
Air cooling |
|
Noise |
≤65dB |
|
Emergency stop switch |
yes |
|
Level of protection |
IP55 |
|
System electrical input |
AC230V 50/60Hz 1000W |
| Rated power | 500KW |
| LV rated current | 667A MAX:734A |
| LV voltage range | 680-790Vdc |
| Ripples coefficient | HV side < 1% F.S. |
| LV side < 2% F.S. | |
| Control accuracy | < 1%(Remote and local control, @ full load) |
| Max. efficiency | 98% @ full load |
| Switching frequency on IGBTs | 6kHz |
| HV Voltage range | 900-1314Vdc |
| Dynamic response time | <2ms |
| Protection function | Reverse polarity, overheating, overload, overvoltage, overcurrent, undervoltage, etc |
| Display | Touch screen |
| Time propagation | 200ms |
| Communication interface and protocol | Modbus_ TCP, RJ45 Modbus_ RTU, RS485 |
| RS485 interface number | one |
| Working temperature | -10ºC to +50ºC |
| Relative humidity | 0~95%,No condensation |
| Altitude | ≤2000m(More than 2000 meters need to be reduced) |
| Cooling mode | Air cooling |
| Noise | ≤65dB |
| Emergency stop switch | yes |
| Level of protection | IP55 |
| System electrical input | AC220V 1000W |
){kind=link}