Customization: | Available |
---|---|
After-sales Service: | Yes |
Warranty: | Yes |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
The On Grid Wind Turbine System, developed by Jinan Deming Power Equipment Co., Ltd, is a comprehensive solution for harnessing wind energy and integrating it into the electrical grid.
The wind turbine captures the power of the wind, converting it into AC electrical energy. This energy is then transformed into DC electrical energy by the on grid controller. The on grid inverter further converts the DC electrical energy into AC electrical energy, ensuring it matches the grid's frequency and phase. A portion of the generated power is supplied to local loads, while any surplus power is seamlessly fed into the grid.
Designed and manufactured by Jinan Deming Power Equipment Co., Ltd.
Technical Parameters of the On Grid Wind Turbine Controller 5 KW
Product Name: Wind Inverter for 5kw Wind Turbine Power System
Company Name: Jinan Deming Power Equipment Co., Ltd
Keywords: Wind Inverter, 5kw Wind Turbine Power System, Grid Tie Wind Charge Controller, Solar Wind Hybrid Controller, MPPT on Grid Wind Charge Controller, Wind Turbine Inverter, Hybrid Wind Solar System, Renewable Energy Inverter
Type | FKJ-GT 5KW |
Wind turbine rated power | 5KW |
Wind turbine Max. power | 10KW |
Wind turbine rated voltage | AC220V |
Function | Rectifier,control, DC output |
Automatic protection function | Over voltage protection, network electric cut off protection, regulated supply output, arrester |
Manual function | Manual brake, reset, emergency switch |
Display mode | LCD |
Display content | Wind turbine voltage, current, power; Solar voltage, current, power; DC output voltage, DC output current, DC output power, total power. |
PWM constant voltage | ≥320dc |
wind turbine 3-phase dump load voltage | 350±5Vdc |
Time-lapse of the wind turbine 3-phase dump load | 12-20 min |
PWM dump load fuse | 20A |
Fuse of DC output | 30A |
Work environment temperature | -30-60°C |
Relative humidity | <90% No condensation |
Noise (1m) | <40dB |
Degree of protection | IP20(Indoor) |
Cooling method | Forced air cooling |
*Communication interface (optional) | RS485/USB/GPRS/WIFI/Ethernet |
Size of the controller (mm) | 560*430*320 |
Weight of the controller | 20Kg |
Size of the dump load (mm) | 500*460*330 |
Weight of the dump load | 30Kg |
Introducing the 5KW Wind Turbine On-Grid Inverter by Jinan Deming Power Equipment Co., Ltd. This high-quality inverter is designed to meet the specific needs of our users, providing a customizable solution for renewable energy generation.
Above parameters are provided as a reference. Please note that they may vary based on your specific customization requirements.
Company Name: Jinan Deming Power Equipment Co., Ltd
Type | DMWG-5KDTL |
Nominal capacity | 5KW |
Rated AC output power | 5KW |
Max. AC output power | 5.5KW |
Wind Turbine Voltage | AC220V |
Input voltage range | 0-450Vdc |
MPPT range | 150~400Vdc |
MPPT power curve | Can be set |
Display | Touch screen |
Rated DC Input Current | 16A |
Max. DC Input current | 17.7A |
THD of AC current | <3% (nominal power) |
Power factor | >0.99 |
Max. Efficiency | 98% |
Allow the grid voltage range | AC220V (Single-phase)±20% |
Nominal AC frequency | 50Hz±10% |
Automatically put into operation | When the DC input and power grids meet to the requirements, the inverters automated operation |
Auto restart time after cut off | 30S |
Protection | Input short voltage, over voltage, connecting contrary, output over current, short circuit, over heat etc. |
Communication interface | RS485/RS232/GPRS/WIFI/Ethernet (optional) |
Work environment temperature | -10ºC~+55ºC |
Relative humidity | 0~95% no condensing |
Applicable altitude | ≤2000 m Higher than 2000m rated power should be reduced |
Cooling method | Controlled forced-air cool |
Noise (1m) | ≤60dB |
Degree of protection | IP20 |
Size(W*L*H) mm | 450*275*770 |
Weight(kg) | 48 |