| Customization: | Available |
|---|---|
| Nature of Source Flow: | Active Inverter |
| Output Power: | >1000W |
|
Still deciding? Get samples of US$ 7400/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
The On grid wind turbine system is composed of wind turbine, on grid controller, on grid inverter, metering device, and power distribution system. Wind energy is converted into AC electrical energy by the wind turbine, and then converted into DC electrical energy by the on grid controller, and then DC electrical energy is converted into AC electrical energy of the same frequency and phase as the grid by the on grid inverter, and part of the power is supplied to the local load. Surplus power is fed into the grid.
On grid wind turbine inverter performance characteristics
(1) The main circuit uses the DSP chip produced by the American TI company, German Infineon IGBT module, drive protection is the Japanese Mitsubishi movement, and the on grid output part use isolation transformer, which is safe and reliable;
(2) Using SPWM pulse width modulation technology, pure sine wave output, automatic synchronous tracking with the grid, power factor close to 1, low current harmonic content, no pollution to the grid, no impact;
(3) Wind turbine input maximum power tracking technology (MPPT)
(4) The power curve of the wind turbine can be set, the default is 20 points, and the internal expansion is 50
(5) 7-inch color touch screen display, system operation data and fault information at a glance, and convenient parameter setting;
(6) On grid inverter current closed-loop control, controllable and adjustable;
(7) The input DC voltage range is wide, adapt to the needs of different occasions;
(8) Frequency disturbance detection technology to realize anti-island control;
(9) The comprehensive power protection scheme and perfect self-detection and protection functions will stop the on grid inverter when a system failure occurs.
(10) Circuit structure is compact, the maximum efficiency≥98%
(11) Support RS485, WiFi, GPRS, Ethernet and other communication methods. You can monitor the working status of the on grid wind power generation system in real time through the PC or mobile phone, and you can also query the historical working status. The mobile terminal is compatible with Android and IOS. All data can be connected to the Internet of Things.
| Type | DMWG -50KSTL |
| Nominal capacity | 50KW |
| Rated AC output power | 50KW |
| Max. AC output power | 55KW |
| Wind Generator rated voltage | AC380V |
| Electrical structure | Power frequency transformer |
| Input voltage range (DC) | 0-800Vdc |
| MPPT voltage range (DC) | 300~700Vdc |
| MPPT power curve | Can be set |
| Rated current (DC) | 94.3A |
| Max input current (DC) | 103.7A |
| THD of AC current | <3%(nominal power) |
| Power factor | >0.99 |
| Max. Efficiency | 96% |
| Euro efficiency | 92% |
| Allow the grid voltage range | 220V/380V/440V/480V (Three-phase)±20% |
| Nominal AC frequency | 50Hz/60Hz±10% |
| Automatically put into operation | When the DC input and power grids meet to thee requirements, the inverters automated operation |
| Auto restart time after cut off | 5min (time adjustment) |
| Protection | Input short voltage, over voltage, connecting contrary, output over current, short circuit, over heat etc. wind turbine curve setting |
| Display | Touch screen |
| Communication interface (optional) | RS485/RS232/GPRS/ WIFI/Ethernet |
| Work environment temperature | -25ºC~+55ºC |
| Relative humidity | 0~95% no condensing |
| Applicable altitude | ≤2000m Higher than 2000m rated power should be reduced |
| Cooling method | Controlled forced-air cool |
| Noise (1m) | ≤60dB |
| Degree of protection | IP20 |
| Size(W*L*H) mm | 800*800*1500 |
| Weight(kg) | 400 |
*Abv p
*Aboe pameter only for reference. Could be custom
){kind=link}