| Customization: | Available |
|---|---|
| Nature of Source Flow: | Passive inverter |
| Certification: | ISO9001, CE |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Our energy system offers bi-directional flow, allowing for discharge from the battery side to the DC grid or charge from the DC grid side to the battery. With fully automatic protection functions for overheating, overload, short circuit, overcurrent, and more, you can trust in the safety and reliability of our product.
Featuring a selection of original imported power devices and a fully digital circuit design, our system utilizes industrial-grade chips that can operate in various environments, including cold, high temperature, and humid conditions. The main circuit incorporates a DSP chip produced by TI of America, Infineon IGBT module, and Infineon movement for driving and protection.
Our system ensures low current harmonic content and no pollution or impact on the grid. With closed-loop control of grid-connected current, it is controllable and adjustable. The wide input voltage range makes it suitable for different occasions.
With a comprehensive power protection scheme and self-test and protection function, our system will automatically stop working in case of system failure. The compact circuit structure ensures maximum efficiency of at least 96%. The protection level can be customized according to your needs.
For easy communication and integration, our system provides an Ethernet interface and follows the standard Modbus TCP communication protocol.
|
Rated power |
250KW |
|
LV rated current |
358A MAX:716A |
|
LV voltage range |
600-700Vdc |
|
Ripples coefficient |
HV side < 1% F.S. LV side < 2% F.S. |
|
Control accuracy |
< 1%(Remote and local control, @ full load) |
|
Max. efficiency |
96% @ full load |
|
Switching frequency on IGBTs |
6kHz |
|
HV Voltage range |
900-1314Vdc |
|
Dynamic response time |
<2ms |
|
Protection function |
Reverse polarity, overheating, overload, overvoltage, overcurrent, undervoltage, etc |
|
Display |
Touch screen |
|
Time propagation |
200ms |
|
Communication interface and protocol |
Modbus_ TCP, RJ45 Modbus_ RTU, RS485 |
|
RS485 interface number |
one |
|
Working temperature |
-10ºC to +50ºC |
|
Relative humidity |
0~95%,No condensation |
|
Altitude |
≤2000m(More than 2000 meters need to be reduced) |
|
Cooling mode |
Air cooling |
|
Noise |
≤65dB |
|
Emergency stop switch |
yes |
|
Level of protection |
IP55 |
|
System electrical input |
AC230V 50/60Hz 1000W |
| Rated power | 500KW |
| LV rated current | 667A MAX:734A |
| LV voltage range | 680-790Vdc |
| Ripples coefficient | HV side < 1% F.S. |
| LV side < 2% F.S. | |
| Control accuracy | < 1%(Remote and local control, @ full load) |
| Max. efficiency | 98% @ full load |
| Switching frequency on IGBTs | 6kHz |
| HV Voltage range | 900-1314Vdc |
| Dynamic response time | <2ms |
| Protection function | Reverse polarity, overheating, overload, overvoltage, overcurrent, undervoltage, etc |
| Display | Touch screen |
| Time propagation | 200ms |
| Communication interface and protocol | Modbus_ TCP, RJ45 Modbus_ RTU, RS485 |
| RS485 interface number | one |
| Working temperature | -10ºC to +50ºC |
| Relative humidity | 0~95%,No condensation |
| Altitude | ≤2000m(More than 2000 meters need to be reduced) |
| Cooling mode | Air cooling |
| Noise | ≤65dB |
| Emergency stop switch | yes |
| Level of protection | IP55 |
| System electrical input | AC220V 1000W |
){kind=link}